Metal Leafing

Add elegance to any design using metal leafing! Use our GourdMaster™ heat-activated glue for fast and easy application over any size area and permanent application so your metal leaf will not flake or peel off. Compliments GourdMaster™ Ink Dye colors well (try Variegated Red with Rich Mahogany or Variegated Green with Antique Gold!).

NEW Metal Leafing! Try the new Silver, Copper, and Variegated Black!  

See step-by-step instructions below.

Step 1: Apply small amount of GourdMaster™ heat-activated Designer Glue using a paint brush.
Step 2: Heat activate the glue using a heat tool for approx. 30 seconds or until glue has lost its shine and turned matte. (You cannot over heat the glue, so more time is better than less)
Step 3: Firmly press your metal leaf against the glue. (You can touch it with your fingers without fear of tarnishing as long as you are not using real metal leafing, such as 24k gold).
Step 4: Use a sponge brush to remove excess.
Step 5: If you went outside your lines, use a nail file or sanding stick to remove excess, and/or your woodburning tool to clean your lines. (We strongly recommend woodburning your design before applying metal leaf.)